상품명 | Arduino Robot |
---|---|
판매가 | 상품 준비중입니다. |
제조사 | arduino |
원산지 | 이탈리아 |
상품코드 | P0000CKL |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
배송방법 | 택배 |
수량 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 2500개 이하)
문서번호 : ED-PR-P0000CIA | ||||||
| ||||||
상품 설명 | ||||||
| ||||||
제품명 |
Arduino Robot |
담당자 |
이지디바이스 | |||
모델명 |
Arduino Robot |
연락처 | ||||
| ||||||
제품 자료와 관련한 문의는 고객센터(070-8633-4647), 이메일( mail@easydevice.co.kr ), 또는 쇼핑몰의 상품기술 QnA 게시판을 이용하시면 (www.easydevice.co.kr ) 편리합니다.
| ||||||
| ||||||
The Arduino Robot is the first official Arduino on wheels. The robot has two processors, one on each of its two boards. The Motor Board controls the motors, and the Control Board reads sensors and decides how to operate. Each of the boards is a full Arduino board programmable using the Arduino IDE. Both Motor and Control boards are microcontroller boards based on the ATmega32u4 (datasheet). The Robot has many of its pins mapped to on-board sensors and actuators. Programming the robot is similar to the process with the Arduino Leonardo. Both processors have built-in USB communication, eliminating the need for a secondary processor. This allows the Robot to appear to a connected computer as a virtual (CDC) serial / COM port. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own robots. The Arduino Robot is the result of the collective effort from an international team looking at how science can be made fun to learn. Arduino is now on wheels, come ride with us!
| ||||||
| ||||||
| ||||||
Robot Top
|
Robot Bottom
| |||||
| ||||||
|
|
|
| |||
Microcontroller |
ATmega32u4 |
SRAM |
2.5 KB (ATmega32u4) | |||
Operating Voltage |
5V |
EEPROM (internal) |
1 KB (ATmega32u4) | |||
Input Voltage |
5V through flat cable |
Clock Speed |
16 MHz | |||
|
5 |
Full color LCD |
over SPI communication | |||
PWM Channels |
6 |
SD card reader |
for FAT16 formatted cards | |||
Analog Input Channels |
4 (of the Digital I/O pins) |
Speaker |
8 Ohm | |||
DC Current per I/O Pin |
40 mA |
|
| |||
Flash Memory |
32 KB (ATmega32u4) of which 4 KB used by bootloader |
|
| |||
| ||||||